Fits 4150 flange 4-bbl intake manifold. Throttle linkage accepts most original accelerator cables & linkage and suits most transmissions kick-down cables.

The Easy Street 600HP Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver and Street Machine. It features the FASTEST most accurate Self Learning available, Wet flow Annular discharge and tons of additional features. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.

Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune! Basic install can be done with just 4 wires and 2 sensors to install Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts.

The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.

FiTech 30005 Easy Street 600 HP Kit Features:

• First Class Tech Support!
• Self Learning ECU.
• Fits any 4150 flange 4-bbl intake manifold.
• Throttle linkage accepts most original accelerator cables & linkage and suits most transmissions kick-down cables.
• Works with virtually all types of distributors (HEI, MBI, MSD Ready to Run, points style, etc). Also can be used with or without CD boxes.
• ECU is mounted on the throttle body, No hole in your firewall and no unsightly harness draped across your engine.
• Throttle body has a built-in fuel pressure regulator.
• Choice of three fuel inlet connections.
• (4) Hi-Flow 600 HP injectors with wet flow technology that have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!!
• ECU features Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat.
• 1 adjustable ECU controlled electric cooling fan control switch.
• Includes O2 sensor and clamp-on style bung flange, no welding required. Just drill a 7/8” hole in your desired location with a step bit. Then clamp on the O2 sensor bung flange and screw in O2 sensor.
• Includes ECU temperature sensor and the most commonly needed reducers.
• Hand-held controller features a touch screen for quick and easy initial set-up.

Throttle body has 1 year limited parts only replacement. Limited Lifetime Warranty on ECU

FiTech 40004 Fuel Command Center 2

The Command Center 2 is the ultimate answer to fuel system simplicity! Designed to be used in vehicles with stock fuel tanks converting from carburetor to EFI. The Command Center 2 eliminates that problem. Complete new design from years of testing has resulted in the most effective system anywhere. The pump in the Command Center 2 never gets uncovered because it receives a steady supply of fuel from your existing fuel system. So your system maintains a constant flow of fuel. The built-in regulator eliminates the need for an external regulator. Since the Command Center 2 is constantly circulating fuel to and from your tank, your fuel pump stays cooler and will have a longer life. The fuel pump noise is also muffled by being submerged in fuel 100% of the time. The Command Center 2 is the best way to provide the necessary increase in volume when adding a power adder such as boost or nitrous to your engine. So, whether you are racing, off-roading, or just cruising, this “compact” external fuel assembly is your all in one solution.

Command Center 2 Features:

• Capable of delivering enough fuel for up to 800hp.
• A low fuel level in the fuel tank will not result in pump starvation.
• Single High Volume Flex Fuel 340 LPH pump is compatible with any EFI system.
• Maintains a 1.5 Liter (0.4 Gallons) reservoir of fuel in the module at all times.
• A submerged pump runs cooler than an external pump.
• Eliminates rigging costly EFI quality inlet and return lines for your fuel system.
• No needle seats or floats to get hung up or stick!
• Every FiTech Go EFI System is available with the Command Center 2 as an option.
• Precision machined extruded aluminum tank.
• Compatible with any other competitive aftermarket or factory EFI installation.
• Hard anodized and laser etched for durability and visual appeal.
• Compatible with E-85 gasoline and alcohol or methanol based fuels.
• Compact size makes it easily mountable in a variety of locations.

Command Center 2 Includes:

• Main assembly w/340 LPH fuel pump, regulator, pressure gauge.
• 5ft high-pressure hose & -6 AN fittings connect main assembly to throttle body.
• Hyperfuel high-flow 30-micron EFI fuel filter.
• Return fitting and seals.

Write a review.

Note: HTML is not translated.
    Bad           Good

FiTech 32205 Easy Street EFI 600HP System with Fuel Pump Command Center 2.0

Product Information

  • $1,190.00