Package includes FiTech 30005 Easy Street 600HP Self Tuning Carb Swap EFI System and FiTech 40007 G-Surge Tank Module Master Kit

FiTech 30005 Easy Street 600HP Self Tuning Carb Swap EFI System

The Easy Street 600HP Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver and Street Machine. It features the FASTEST most accurate Self Learning available, Wet flow Annular discharge and tons of additional features. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.

Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune! Basic install can be done with just 4 wires and 2 sensors to install Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts.

The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.

FiTech 30005 Easy Street 600 HP Kit Features:

• First Class Tech Support!
• Self Learning ECU.
• Fits any 4150 flange 4-bbl intake manifold.
• Throttle linkage accepts most original accelerator cables & linkage and suits most transmissions kick-down cables.
• Works with virtually all types of distributors (HEI, MBI, MSD Ready to Run, points style, etc). Also can be used with or without CD boxes.
• ECU is mounted on the throttle body, No hole in your firewall and no unsightly harness draped across your engine.
• Throttle body has a built-in fuel pressure regulator.
• Choice of three fuel inlet connections.
• (4) Hi-Flow 600 HP injectors with wet flow technology that have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!!
• ECU features Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat.
• 1 adjustable ECU controlled electric cooling fan control switch.
• Includes O2 sensor and clamp-on style bung flange, no welding required. Just drill a 7/8” hole in your desired location with a step bit. Then clamp on the O2 sensor bung flange and screw in O2 sensor.
• Includes ECU temperature sensor and the most commonly needed reducers.
• Hand-held controller features a touch screen for quick and easy initial set-up.

Throttle body has 1 year limited parts only replacement. Limited Lifetime Warranty on ECU



FiTech 40007 G-Surge Tank Module Master Kit

FiTech Fuel Injection now offers the G-Sump Hyper Fuel G-Surge Tank Module. The G-Surge Module is typically installed in vehicles that potentially can experience fuel starvation due to fuel sloshing around in an inadequately baffled tank. While this can occur in any vehicle when the tank is not fully filled, it is more frequent in vehicles subject to violent changes in direction such as autocross, off-road, drag racing and other types of racing.

G-Surge Tank Module Features & Benefits:

• Mounts under the hood and is fed by the stock fuel pump.
• Maintains a 1.5 Liter reservoir of fuel in the module.
• High volume 340 L/PH pump inside the module feeds any EFI system and supplies enough fuel for 750 HP.
• Precision machined of billet aluminum.
• AN -06 fittings are supplied in the top of the module.
• Top cover of module is fitted with an 0-ring seal.

Write a review.

Note: HTML is not translated.
    Bad           Good

FiTech 33005 Easy Street 600HP EFI System with G-Surge Tank Fuel Pump Module

Product Information

  • $1,094.00