Package includes FiTech 30005 Easy Street 600HP Self Tuning Carb Swap EFI System and FiTech 40019 G-Sump In-Tank Module Master Kit

FiTech 30005 Easy Street 600HP Self Tuning Carb Swap EFI System

The Easy Street 600HP Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver and Street Machine. It features the FASTEST most accurate Self Learning available, Wet flow Annular discharge and tons of additional features. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.

Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune! Basic install can be done with just 4 wires and 2 sensors to install Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts.

The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.

FiTech 30005 Easy Street 600 HP Kit Features:

• First Class Tech Support!
• Self Learning ECU.
• Fits any 4150 flange 4-bbl intake manifold.
• Throttle linkage accepts most original accelerator cables & linkage and suits most transmissions kick-down cables.
• Works with virtually all types of distributors (HEI, MBI, MSD Ready to Run, points style, etc). Also can be used with or without CD boxes.
• ECU is mounted on the throttle body, No hole in your firewall and no unsightly harness draped across your engine.
• Throttle body has a built-in fuel pressure regulator.
• Choice of three fuel inlet connections.
• (4) Hi-Flow 600 HP injectors with wet flow technology that have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!!
• ECU features Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat.
• 1 adjustable ECU controlled electric cooling fan control switch.
• Includes O2 sensor and clamp-on style bung flange, no welding required. Just drill a 7/8” hole in your desired location with a step bit. Then clamp on the O2 sensor bung flange and screw in O2 sensor.
• Includes ECU temperature sensor and the most commonly needed reducers.
• Hand-held controller features a touch screen for quick and easy initial set-up.

Throttle body has 1 year limited parts only replacement. Limited Lifetime Warranty on ECU

FiTech 40019 G-Sump In-Tank Module Master Kit

FiTech Fuel Injection now offers the G-Sump Hyper Fuel In-Tank Fuel Module. You can experience the advantage of a high volume fuel system with the pump inside the fuel tank. With the pump submerged in fuel, it will run quieter and last longer. This is the easiest way to convert your existing or new fuel tank to an in-tank EFI fuel system.

G-Sump In-Tank Module Features & Benefits:

• Installs in almost any tank with a depth of 7-inches to 14-inches to fit nearly any popular application.
• Low profile design for maximum clearance from floorpan of vehicle.
• Billet aluminum construction with precision machined components.
• Unique o-ring 360° mounting flange permits easy removal for servicing and re-use. Flange incorporates -06 AN fittings.
• High quality 340 L/PH fuel pump for engines up to 750 HP.
• Fuel trap baffle assures constant fuel flow under cornering, braking, and hard acceleration conditions.

Write a review.

Note: HTML is not translated.
    Bad           Good

FiTech 34005 Easy Street 600HP EFI System with G-Sump In-Tank Fuel Pump Module

Product Information

  • $1,144.00