The 30012 Go EFI 8 1200 HP (Power Adder Plus) is the Ultimate system for the serious power builder. This system features 8 High Flow injectors and is capable of fueling 1200 HP! The Go EFI 8 1200HP is our TOP OF THE LINE system and comes with all of the Data-logging , and Pro-tuning software as standard features. PLUS The Annular Discharge design is increased to 20 jet streams to handle the monster flow of this unit! This system is capable of 25 lbs of Boost right out of the box and can be used in a blow thru turbo or blower application - or on a single roots style supercharger. You can also run a single stage of Wet Nitrous and control your A/F as well as Ignition timing. **This kit is suitable for higher horsepower engines while equally at home on your daily driver 383.***Works from 250-1200 HP! ***

Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune! Basic install can be done with just 4 wires and 2 sensors to install Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts.

The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.

Ignition timing can be controlled and adjusted on the fly from your touch screen controller. Air Fuel ratios can also be optimized on the fly as you drive. Try that with your Carb!

Manufactured with OE engineering. FiTech ECU’s are used Globally and pass euro 5 emissions standards in new vehicles.

FiTech 30012 Go EFI 8 1200 HP Kit Features;

• First Class Tech Support!
• Self Learning ECU.
• Fits any 4150 4-bbl intake manifold.
• Throttle linkage accepts most original accelerator cables & linkage and suits most transmissions kick-down cables.
• Works with virtually all types of distributors (HEI, MBI, MSD Ready to Run, points style, etc). Also can be used with or without CD boxes.
• No special distributor is required for Spark/Timing control when distributor’s advance mechanism is locked and inoperative.
• ECU is mounted on the throttle body, No hole in your firewall and no unsightly harness draped across your engine.
• Throttle body has a built-in fuel pressure regulator.
• Choice of three fuel inlet connections.
• (8) Precision Flow matched injectors capable of flowing 1200 HP with wet flow technology that have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!!
• 8 Gig data logging.
• ECU features Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat.
• Includes O2 sensor and clamp-on style bung flange, no welding required. Just drill a 7/8” hole in your desired location with a step bit. Then clamp on the O2 sensor bung flange and screw in O2 sensor.
• Includes ECU temperature sensor and the most commonly needed reducers.
• Boost Ready Throttle Body.
• Boost Ready ECU 2.5 Bar MAP sensor good for 25 PSI!
• NITROUS control with a host of safety features and accessories for Nitrous tuning.
• Nitrous and Boost specific target A/F target options.
• Boost and Nitrous timing retard strategies.
• 2 fan control (can set at separate temperatures).
• Air-conditioning idle speed input kick up.
• Hand-held controller features a touch screen for quick and easy initial set-up.

Throttle body has 1 year limited parts only replacement. Limited Lifetime Warranty on ECU



FiTech 40020 Hy-Fuel 1600HP In-Tank Dual Fuel Pump Retrofit Kit

The HyperFuel™ Hy-Fuel Dual Pump In-Tank Retrofit Kit has the advantage of a high-volume fuel system with the pumps inside the fuel tank. This kit is made to be fitted into an existing or aftermarket gas tank as well as a fuel cell with ease. With the pumps submerged in fuel, they will run quieter and last longer. The kit features dual 340 L/PH pumps that are capable of up to 1600 naturally aspirated horsepower as well as being depth adjustable for tanks from 6 to 14 inches. It can fit deeper tanks using an optional fuel pump mounting extension.

FiTech 40020 Hy-Fuel 1600HP In-Tank Dual Fuel Pump Retrofit Kit Features:

• Dual High quality 340 L/PH fuel pump for engines up to 1600HP.
• 35 square inch filter sock.
• Installs in almost any tank with a depth of 6-inches to 14-inches to fit nearly any popular application.
• Unique O-ring 360° mounting flange permits easy removal for servicing and re-use.
• Flange incorporates -06 AN fittings.
• Low profile design for maximum clearance between vehicle floor pan and top of fuel tank.
• Compatible with E-85 gasoline and alcohol or methanol based fuels.
• Billet aluminum construction with precision machined components.


Write a review.

Note: HTML is not translated.
    Bad           Good

FiTech 37012 1200HP Boost Ready Carb Swap EFI System with In-Tank Dual Fuel Pump Retrofit Kit

Product Information

  • $1,839.00